进口塑胶料
注:请在右边的搜索栏查找产品

PPS 1140L0 含40玻璃纤维增强

添加时间:2013-05-20  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
PPS 1140L0
 
FORTRON® 1140L0 SF3001 NATURAL
 
FORTRON 1140L0 | PPS | Glass Reinforced
 
Description
Fortron 1140L0 is a 40% glass-reinforced extrusion grade. It exhibits excellent heat and chemical resistance, good electrical properties and is inherently flame-retardant. The high hardness and rigidity at elevated temperatures allows for good load bearing performance. This product has good weldability due to the modest filler level. 1140L0 is used to produce rods and slabs.
 
ISO Data Physical properties Value Unit Test Standard
Phys Density 1650 kg/m³ ISO 1183
Water absorption (23℃-sat) 0.02 % ISO 62
Mech Mechanical properties Value Unit Test Standard
Tensile stress at break (5mm/min) 185 MPa ISO 527-2/1A
Tensile strain at break (5mm/min) 1.9 % ISO 527-2/1A
Flexural modulus (23℃) 14000 MPa ISO 178
Flexural stress @ break 280 MPa ISO 178
Charpy notched impact strength @ 23℃ 10 kJ/m² ISO 179/1eA
Charpy notched impact strength @ -30℃ 10 kJ/m² ISO 179/1eA
Therm Thermal properties Value Unit Test Standard
Melting temperature (10℃/min) 280 ISO 11357-1,-2,-3
Glass transition temperature (10℃/min) 90 ISO 11357-1,-2,-3
Flammability @1.6mm nom. thickn. V-0 class UL94
thickness tested (1.6) 1.5 mm UL94
Flammability at thickness h V-0 class UL94
thickness tested (h) 0.38 mm UL94
SpecProd Test specimen production Value Unit Test Standard
Injection molding melt temperature 310 - 340 ISO 294
Injection molding mold temperature 135 - 160 ISO 294
 
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.02%
 
FORTRON should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< - 30℃. The time between drying and processing should be as short as possible.
 
For subsequent storage the material should be stored dry in the dryer until processed (<= 60 h).
 
Drying time (h):3-4
Drying temperature (℃):130-140
 
销售泰科纳PA6,PA66,PBT,LCP,PPS等工程塑料电话:[136 6298 6968] [185 5121 3137] 联系人:谭经理
 
相关材料