进口塑胶料
注:请在右边的搜索栏查找产品

PP HW 30K ECR-BK 含玻璃珠增强

添加时间:2013-12-29  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
Starpylen PP HW 30K ECR
Eurostar Engineering Plastics
STARPYLEN ECR (GREEN PRODUCTS)
 
Starpylen HW 30K ECR-BK is a reinforced Polypropylene with a low carbon footprint spherical filler, Injection Molding Resin (also known as HW30KECR).
 
定属记号:聚丙烯
产品牌号:PP HW 30K ECR
中国代理:苏州希普能工程塑料 185 5121 3137 谭经理
版权所有:http://www.simibc.com/sujiao/pp/starpylen/hw30kecr-bk.html
 
材料物性
Impact VALUE UNIT STANDARD
Izod Impact,notched 80*10*4 +23℃ 2.8 kJ/m^2 ISO 180/1A
Izod Impact,unnotched 80*10*4 +23℃ 21 kJ/m^2 ISO 180/1U
Mechanical VALUE UNIT STANDARD
Tensile Stress,yield 24 MPa ISO 527
Tensile Strain,break 15 % ISO 527
Flexural Modulus 1900 MPa ISO 178
Physical VALUE UNIT STANDARD
Density 1.1 g/cm^3 ISO 1183
Melt Viscosity Rate (230℃/2.16 kg) 8.7 cm^3/10 min ISO 1133
Mold Shrinkage,flow (4mm thickness) 2.2-2.4 % E2P Method
PROPERTY VALUE UNIT STANDARD
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 56 ISO 75/Af
PARAMETER Setting Unit
Mold Temperature 30-50
Rear-Zone 1 Temperature 195-205
Middle-Zone 2 Temperature 215-225
Front-Zone 3 Temperature 225-250
Melt Temperature 225-250
Drying Temperature 70
Drying Time 3
PROCESSING PARAMETERS : see above typical molding conditions.
DRYING : is not essential when material is delivered in sealed bags with moisture content below 0.2 %.
BARRELS, SCREWS, MOULDS : use wear resisting steel or alloy such as bimetallic cylinders, nitrided screws.
USE OF REGRIND : the properties of the component should be checked in order to ascertain the maximum acceptable level of regrind.
SAFETY : please refer to Material Safety Datasheet.
 
 
Eurostar Engineering Plastics 40 Years History
 
1972 Creation of Eurostar
 
Fosses is one of the first independent French manufacturing sites dedicated to glass fiber reinforced polyamide manufacturing. One of the founder’s shareholders is the Owens Corning Company that stayed into the capital for more than 10 years.
 
1983 Buy out of Eurostar by Ferro: the company becomes Ferro-Eurostar
 
While still mainly acting in France, Ferro brings resources that increase Eurostar production capacities and implements a mature industrial organization.
 
Starflam brand name starts having an European expansion.
 
Starflam
 
1995 Buy out of Ferro-Eurostar by LNP: the company becomes LNP-Eurostar
 
LNP is an American Company specialized in compounding that was created in 1948. At that time, it was owned by the Kawasaki Steel Company.
 
Ferro’s decision to sell the business is driven by a new company policy orientation that focuses on the historical company skills in Europe (pigments).
 
LNP is one of the global players in highly valued compounds. The sell of Eurostar is an opportunity that the company takes with no hesitation in order to extend its product range with the addition of polyamide and polypropylene compounds.
 
It also brings to Eurostar an access to a new customer’s portfolio and increases the site capabilities to develop engineering compounds. LNP elevates the site quality standards and implements a culture of quality.
 
LNP
 
2002 Buy out of LNP by GE Plastics
 
Following up its buy out by the Nippon Steel Company, Kawasaki Steel focuses its activity on steel manufacturing.
 
GE Pastics makes a strategic investment to position itself on the engineering plastics market one of the product gap at that time whereas the growth potential is high.
 
LNP becomes part of a conglomerate which global strength is not argued.
 
GE opens to LNP R&D capabilities that lead to designing and launching the Starflam Xgen platform, developed and manufactured at Fosses. GE brings to Eurostar a strong culture of risk management and process control and monitoring at each level of the company processes.
 
GE Plastics
 
2007 Buy out of GE Plastics by SABIC 
This new business unit adds up to SABIC traditional business units. It becomes SABIC Innovative Plastics.
 
Sabic
 
2010 Managers Buy Out, company becomes
Starflam
希普能工程塑料
相关材料
上一页:PP HZ 50E3 高比重聚丙烯           下一页:PP HU 70E4 ECR 含70%碳酸钙填充