进口塑胶料
注:请在右边的搜索栏查找产品

PP PP-GF50-10 含50%长玻纤,抗紫外线

添加时间:2013-06-22  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
celstran PP PP-GF50-10
 
CELSTRAN® PP-GF50-10 AD3019 BLACK
 
CELSTRAN PP-GF50-10 | PP | Glass Reinforced
 
Description
50% long fiber glass reinforced, enhanced flow, UV stabilized, Polypropylene
 
ISO Data Mechanical properties Value Unit Test Standard
Phys Density 1330 kg/m³ ISO 1183
Mech Mechanical properties Value Unit Test Standard
Tensile modulus (1mm/min) 11000 MPa ISO 527-2/1A
Tensile stress at break (5mm/min) 107 MPa ISO 527-2/1A
Tensile strain at break (5mm/min) 1.7 % ISO 527-2/1A
Flexural modulus (23℃) 11000 MPa ISO 178
Flexural strength (23℃) 181 MPa ISO 178
Charpy notched impact strength @ 23℃ 17 kJ/m² ISO 179/1eA
 
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.2%
 
It is normally not necessary to dry CELSTRAN PP. However, should there be surface moisture (condensate) on the molding compound as a result of incorrect storage, drying is required.
 
The product can then be stored in standard conditions until processed.
 
Drying time (h):2.00
Drying temperature (℃):90 - 100
 
希普能工程塑料