进口塑胶料
注:请在右边的搜索栏查找产品

PP PP-GF40-0405 P10/10 含40%长玻纤,抗UV

添加时间:2013-06-20  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
celstran PP PP-GF40-0405 P10/10
 
CELSTRAN® PP-GF40-0405 AD3019 BLACK 11MM
CELSTRAN® PP-GF40-0405P10/10
CELSTRAN® PP-GF40-0405P10/10 BLK
 
CELSTRAN PP-GF40-0405 P10/10 | PP | Glass Reinforced
 
Description
Material code according to ISO 1043-1: PP
 
UV-stabilized polypropylene reinforced with 40 weight percent long glass fibers. The fibers are chemically coupled to the polypropylene matrix. The pellets are cylindrical and normally as well as the embedded fibers 10 mm long.
 
Parts molded of CELSTRAN have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly.
 
The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding.
 
Application field: Functionial/structural parts for automotive
 
ISO Data Mechanical properties Value Unit Test Standard
Phys Density 1220 kg/m³ ISO 1183
Mech Mechanical properties Value Unit Test Standard
Tensile modulus (1mm/min) 9400 MPa ISO 527-2/1A
Tensile stress at break (5mm/min) 134 MPa ISO 527-2/1A
Tensile strain at break (5mm/min) 2 % ISO 527-2/1A
Therm Thermal properties Value Unit Test Standard
Melting temperature (10℃/min) 165 ISO 11357-1,-2,-3
DTUL @ 1.8 MPa 155 ISO 75-1/-2
DTUL @ 8.0 MPa 135 ISO 75-1/-2
 
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.2%
 
It is normally not necessary to dry CELSTRAN PP
 
Drying time (h):2
Drying temperature (℃):90 - 100
 
希普能工程塑料