进口塑胶料
注:请在右边的搜索栏查找产品

PP PP-GF30-02 含30%长玻纤

添加时间:2013-06-18  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
celstran PP PP-GF30-02
 
CELSTRAN® PP-GF30-02 AD3002 BLACK
CELSTRAN® PP-GF30-02 AD3002 BLACK GM
CELSTRAN® PP-GF30-02 AD3019 BLACK
CELSTRAN® PP-GF30-02 AF3001 NAT
CELSTRAN® PP-GF30-02 AF3001 NATURAL
 
CELSTRAN PP-GF30-02 | PP | Glass Reinforced
 
Description
30% long strand glass fiber reinforced polypropylene
 
ISO Data Mechanical properties Value Unit Test Standard
Phys Density 1120 kg/m³ ISO 1183
Mech Mechanical properties Value Unit Test Standard
Tensile modulus (1mm/min) 5800 MPa ISO 527-2/1A
Tensile stress at break(5mm/min) 92 MPa ISO 527-2/1A
Tensile strain at break(5mm/min) 2.53 % ISO 527-2/1A
Flexural modulus (23℃) 6000 MPa ISO 178
Flexural strength (23℃) 155 MPa ISO 178
Charpy notched impactstrength @ 23℃ 20 kJ/m² ISO 179/1eA
Therm Thermal properties Value Unit Test Standard
DTUL @ 1.8 MPa 150 ISO 75-1/-2
 
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.2%
 
It is normally not necessary to dry CELSTRAN PP. However, should there be surface moisture (condensate) on the molding compound as a result of incorrect storage, drying is required.
 
The product can then be stored in standard conditions until processed.
 
Drying time (h):2.00
Drying temperature (℃):90 - 100
 
希普能工程塑料