进口塑胶料
注:请在右边的搜索栏查找产品

POM S 27242 XAP 低挥发,低温撞击

添加时间:2013-06-17  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
hostaform pom S 27242 XAP
 
HOSTAFORM S 27242 XAP² ™ | POM | Impact Modified
 
Description
Easy flow, impact modified injection molding grade, with good low temperature impact strength and good weld line strength and reduced emissions. Emission according to VDA 275 < 5 mg/kg
 
Preliminary data sheet
 
ISO Data Mechanical properties Value Unit Test Standard
Phys Density 1350 kg/m³ ISO 1183
Melt volume rate (MVR) 16 cm³/10min ISO 1133
MVR test temperature 190 ISO 1133
MVR test load 2.16 kg ISO 1133
Mech Mechanical properties Value Unit Test Standard
Tensile modulus (1mm/min) 2200 MPa ISO 527-2/1A
Tensile stress at yield (50mm/min) 50 MPa ISO 527-2/1A
Tensile strain at yield (50mm/min) 8.5 % ISO 527-2/1A
Nominal strain at break (50mm/min) 40 % ISO 527-2/1A
Charpy impact strength @ 23℃ 130 kJ/m² ISO 179/1eU
Charpy notched impact strength @ 23℃ 7 kJ/m² ISO 179/1eA
Charpy notched impact strength @ -30℃ 6 kJ/m² ISO 179/1eA
SpecProd Test specimen production Value Unit Test Standard
Processing conditions acc. ISO 9988-2 - Internal
 
Processing
Pre Drying
Necessary low maximum residual moisture content: 0.15%
 
Drying time (h):3 - 4
Drying temperature (℃):100 - 120
希普能工程塑料
相关材料