进口塑胶料
注:请在右边的搜索栏查找产品

POM AM90S Plus 抗菌(杀菌剂)

添加时间:2013-06-04  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
hostaform pom AM90S Plus
 
HOSTAFORM AM90S Plus | POM | Specialty
 
Description
Hostaform® acetal copolymer grade AM90S Plus is a standard melt viscosity acetal copolymer ased material containing an antimicrobial ingredient. AM90S Plus reaches maximum efficacy more rapidly than standard AM90S. Hostaform® AM90SPlus provides the same physical and mechanical performance of standard Hostaform and Celcon acetal copolymer grades plus the added benefit of inhibiting bacterial growth.
 
Preliminary Data Sheet
 
Other Processing
Injection Molding
Standard injection moulding machines with three phase (15 to 25 D)
plasticating screws will fit.
 
Melt temperature:190-230℃
Mould temperature:80-120℃
 
ISO Data Mechanical properties Value Unit Test Standard
Phys Density 1410 kg/m³ ISO 1183
Melt volume rate (MVR) 8 cm³/10min ISO 1133
MVR test temperature 190 ISO 1133
MVR test load 2.16 kg ISO 1133
Mold shrinkage - parallel 2.6 % ISO 294-4
Mold shrinkage - normal 2.2 % ISO 294-4
Mech Mechanical properties Value Unit Test Standard
Tensile modulus (1mm/min) 2750 MPa ISO 527-2/1A
Tensile stress at yield (50mm/min) 65 MPa ISO 527-2/1A
Tensile strain at yield (50mm/min) 10 % ISO 527-2/1A
Flexural modulus (23℃) 2650 MPa ISO 178
Charpy notched impact strength @ 23℃ 5.5 kJ/m² ISO 179/1eA
Charpy notched impact strength @ -30℃ 5.5 kJ/m² ISO 179/1eA
Therm Thermal properties Value Unit Test Standard
Melting temperature (10℃/min) 167 ISO 11357-1,-2,-3
DTUL @ 1.8 MPa 100 ISO 75-1/-2
Coeff.of linear therm. expansion (parallel) 1.1 E-4/℃ ISO 11359-2
SpecProd Test specimen production Value Unit Test Standard
Processing conditions acc. ISO 9988-2 - Internal
 
Processing
Pre Drying
Drying is not normally required. If material has come in contact with moisture through improper storage or handling or through regrind use, drying may be necessary to prevent splay and odor problems.
 
Drying time (h):3
Drying temperature (℃):80-100
希普能工程塑料
相关材料
上一页:POM C 13021 超高韧,耐水解,耐化学           下一页:POM AM90S 抗菌(杀菌剂)