进口塑胶料
注:请在右边的搜索栏查找产品

POM M90-45XAP 抗紫外线,低挥发

添加时间:2013-06-03  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
泰科纳POM M90-45XAP®
 
CELCON® M90-45 XAP® CC34193 DK GRAY 136B
CELCON® M90-45 XAP® CC34466 GRAY #2 138B
CELCON® M90-45 XAP® CC34643 GRAY 105B
CELCON® M90-45 XAP® CD34611 BLACK 201B
CELCON® M90-45 XAP® CF2001 NATURAL
CELCON® M90-45 XAP® CV34644 SAND 457B
CELCON® M90-45 XAP® CY34815 BROWN 453B
 
CELCON M90-45XAP® | POM | Specialty
 
Description
Celcon® acetal copolymer grade M90-45XAP® is a UV resistant, low emission version, medium viscosity polymer providing optimum performance in general purpose injection molding primarily for the interior automotive market. This grade provides overall excellent performance in many applications.
Celcon® M90-45XAP® is formulated in custom colors for Toyota interior UV stabilized applications
 
ISO Data Mechanical properties Value Unit Test Standard
Phys Density 1410 kg/m³ ISO 1183
Melt volume rate (MVR) 8 cm³/10min ISO 1133
MVR test temperature 190 ISO 1133
MVR test load 2.16 kg ISO 1133
Mold shrinkage - parallel 2.5 % ISO 294-4
Mold shrinkage - normal 2.4 % ISO 294-4
Mech Mechanical properties Value Unit Test Standard
Tensile modulus (1mm/min) 2650 MPa ISO 527-2/1A
Tensile stress at yield (50mm/min) 64 MPa ISO 527-2/1A
Tensile strain at yield (50mm/min) 9 % ISO 527-2/1A
Flexural modulus (23℃) 2450 MPa ISO 178
Flexural strength (23℃) 77 MPa ISO 178
Charpy notched impact strength @ 23℃ 6 kJ/m² ISO 179/1eA
Charpy notched impact strength @ -30℃ 4 kJ/m² ISO 179/1eA
Notched impact strength (Izod) @ 23℃ 6 kJ/m² ISO 180/1A
Therm Thermal properties Value Unit Test Standard
Melting temperature (10℃/min) 167 ISO 11357-1,-2,-3
DTUL @ 1.8 MPa 91 ISO 75-1/-2
DTUL @ 0.45 MPa 151 ISO 75-1/-2
Coeff.of linear therm. expansion (parallel) 1.1 E-4/℃ ISO 11359-2
Coeff.of linear therm. expansion (normal) 1.2 E-4/℃ ISO 11359-2
 
Processing
Pre Drying
Drying is recommended to achieve lowest emission performance. If material contacts moisture through improper storage or handling, drying may be necessary to prevent splay and odor issues.
 
Drying time (h):3
Drying temperature (℃):80 - 100
希普能工程塑料
相关材料
上一页:POM M90AW 耐磨损性良好           下一页:POM M90-45H 抗紫外线