进口塑胶料
注:请在右边的搜索栏查找产品

PBT PBT-GF50-08 含50%长玻璃纤维

添加时间:2013-05-29  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
泰科纳PBT PBT-GF50-08
 
CELSTRAN® PBT-GF50-08 AD3002 BLACK
CELSTRAN® PBT-GF50-08 AF3001 NATURAL
 
CELSTRAN PBT-GF50-08 | PBT | Glass Reinforced
 
Description
50% Long Glass Fiber Reinforced PBT
 
Other Processing
Injection Molding
Celstran can be processed on a standard injection molding unit.
A general purpose metering screw is recommended with a zone distribution of 40% feed, 40% transition, and 20% metering.
A free flowing check ring assembly is recommended.
 
Melt Temp.:280-300℃.
Mold Temp.:80-90℃.
 
ISO Data Mechanical properties Value Unit Test Standard
Mech Tensile modulus (1mm/min) 16600 MPa ISO 527-2/1A
Tensile stress at break (5mm/min) 178 MPa ISO 527-2/1A
Tensile strain at break (5mm/min) 1.45 % ISO 527-2/1A
Flexural modulus (23℃) 15900 MPa ISO 178
Flexural strength (23℃) 285 MPa ISO 178
Charpy notched impact strength @ 23℃ 32 kJ/m² ISO 179/1eA
 
Processing
Pre Drying
CELSTRAN PBT should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< -30℃. The time between drying and processing should be as short as possible
希普能工程塑料
相关材料