进口塑胶料
注:请在右边的搜索栏查找产品

Celstran PA66 GF50-20

添加时间:2013-05-01  信息来源:http://www.simibc.com/  作者:苏州希普能塑料

CELSTRAN® PA66-GF50-20 AD3007 BLACK

 

CELSTRAN PA66-GF50-20 | PA66 | Glass Reinforced

 

Description
50% long fiber glass reinforced, heat stabilized, Nylon 6/6

 

ISO Data Physical properties Value Unit Test Standard
Phys Density 1560 kg/m³ ISO 1183
Mech Mechanical properties Value Unit Test Standard
Tensile modulus (1mm/min) 16500 MPa ISO 527-2/1A
Tensile stress at break (5mm/min) 255 MPa ISO 527-2/1A
Tensile strain at break (5mm/min) 2 % ISO 527-2/1A
Flexural modulus (23℃) 15000 MPa ISO 178
Flexural strength (23℃) 405 MPa ISO 178
Charpy notched impact strength @ 23℃ 45 kJ/m² ISO 179/1eA
Therm Thermal properties Value Unit Test Standard
DTUL @ 1.8 MPa 253 ISO 75-1/-2

 

Processing
Pre Drying
Necessary low maximum residual moisture content: 0.18%

 

CELSTRAN PA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< -30℃. The time between drying and processing should be as short as possible.

 

Note: Material can be over dried and may discolor.

 

Drying time (h):2 - 4
Drying temperature (℃):70 - 80

希普能工程塑料
相关材料
上一页:Celstran PA66 GF50-20 AD3007           下一页:Celstran PA66 GF50-07