进口塑胶料
注:请在右边的搜索栏查找产品

Celstran PA66 CF40-01-US

添加时间:2013-04-30  信息来源:http://www.simibc.com/  作者:苏州希普能塑料

CELSTRAN PA66-CF40-01-US | PA66 | Specialty

 

Description
40% long carbon fiber reinforced Nylon 6/6


ISO Data Physical properties Value Unit Test Standard
Phys Density 1340 kg/m³ ISO 1183
Mech Tensile modulus (1mm/min) 31000 MPa ISO 527-2/1A
Tensile stress at break (5mm/min) 290 MPa ISO 527-2/1A
Tensile strain at break (5mm/min) 1.06 % ISO 527-2/1A
Flexural modulus (23℃) 26000 MPa ISO 178
Flexural strength (23℃) 464 MPa ISO 178
Charpy notched impact strength @ 23℃ 24 kJ/m² ISO 179/1eA

 

Processing
Pre Drying
Necessary low maximum residual moisture content: 0.18%

 

CELSTRAN PA should in principle be predried. Because of the necessary low maximum residual moisture content the use of dry air dryers is recommended. The dew point should be =< -30℃. The time between drying and processing should be as short as possible.

 

Note: Material can be over dried and may discolor.

 

Drying time (h):2-4
Drying temperature (℃):70-80

希普能工程塑料
相关材料
上一页:Celstran PA66 GF20-02P11/12           下一页:Celstran PA66 AF35-02-US