进口塑胶料
注:请在右边的搜索栏查找产品

PA66 AFR430B1 阻燃,玻璃纤维增强

添加时间:2013-05-16  信息来源:http://www.simibc.com/  作者:苏州希普能塑料

Eurostar Engineering Plastics
STARFLAM(阻燃)(PA-PP)

 

Starflam* PA66 AFR430B1
产品描述:Starflam PA66 AFR430B1 是一个含阻燃剂和玻璃纤维增强的尼龙66注塑成型树脂。
Description:Starflam AFR430B1 is a Flame Retardant, Glass Fiber Reinforced Polyamide 66 Injection Molding Resin

 

产品数据表

功能 PROPERTY (1) UNIT STANDARD VALUE
MECHANICAL Flexural Modulus,2 mm/min MPa ISO 178 6600
Flexural Stress,break,2 mm/min MPa ISO 178 170
Tensile Modulus,1 mm/min MPa ISO 527 6600
Tensile Strain,break,5 mm/min % ISO 527 2.5
Tensile Stress,break,5 mm/min MPa ISO 527 120
IMPACT Izod Impact,notched 80*10*4 +23℃ kJ/m^2 ISO 180/1A 5
Izod Impact,notched 80*10*4 -20℃ kJ/m^2 ISO 180/1A 4
Izod Impact,notched 80*10*4 -40℃ kJ/m^2 ISO 180/1A 3
Izod Impact,unnotched 80*10*4 +23℃ kJ/m^2 ISO 180/1U 50
THERMAL HDT/Ae,1.8 MPa Edgew 120*10*4 sp=100mm ISO 75/Ae 225
HDT/Be,0.45MPa Edgew 120*10*4 sp=100mm ISO 75/Be 245
Vicat Softening Temp,Rate B/120 ISO 306 247
PHYSICAL Density g/cm^3 ISO 1183 1.48
Mold Shrinkage on Tensile Bar,flow % E2P Method 0.3-0.5
Water Absorption,(23℃/sat) % ISO 62 5.5
FLAME CHARACTERISTICS Glow Wire Flammability Index 960℃,passes at mm IEC 60695-2-12 2
UL E2P measurement,94V-0 Flame Class Rating mm UL 94 by E2P 0.75
ELECTRICAL Comparative Tracking Index V IEC 60112 275
PARAMETER Setting Unit
Drying Temperature 75-85
Drying Time 4-6 hrs
Maximum Moisture Content 0.2 %
Mold Temperature 60-90
Rear-Zone 1 Temperature 260-270
Middle-Zone 2 Temperature 270-280
Front-Zone 3 Temperature 270-285
Melt Temperature 270-285

希普能工程塑料
相关材料