进口塑胶料
注:请在右边的搜索栏查找产品

PA66 11C40 NC010 含40%矿物增强,热稳定

添加时间:2013-11-16  信息来源:http://www.simibc.com/  作者:苏州希普能塑料

Minlon PA66 11C40 NC010

Minlon® 11C40 NC010 | PA66-I-MD40 MINERAL REINFORCED NYLON RESIN
 
Regional Availability
North America, South and Central America
 
Processing
Injection Moulding
 
Delivery form
Pellets
 
Additives
Release agent
 
Product Text
Common features of Minlon® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness /toughness, good high temperature performance, good chemical resistance, paintability, dimensional stability and low warpage.
 
Grades with improved electrical and flammability properties are available within the Zytel® nylon resin product line. In addition, Minlon® nylon resin is available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses.
 
The good melt stability of Minlon® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
 
Minlon® nylon resin typically is used in demanding applications in the automotive, electrical, electronic, domestic appliances and construction industries.
 
Minlon® 11C40 NC010 is a 40% mineral reinforced, heat stabilized polyamide 66 resin for injection moulding.
 
PROPERTIES
Rheological properties dry / cond Unit Test Standard
Moulding shrinkage,parallel 0.9 / * % ISO 294-4,2577
Moulding shrinkage,normal 0.9 / * % ISO 294-4,2577
Mechanical properties dry / cond Unit Test Standard
Tensile Modulus 5900 / 2600 MPa ISO 527-1/-2
Stress at break 90 / 63 MPa ISO 527-1/-2
Strain at break 10 / 35 % ISO 527-1/-2
Charpy impact strength,23℃ 200 / N kJ/m² ISO 179/1eU
Charpy impact strength,-30℃ 85 / 100 kJ/m² ISO 179/1eU
Charpy notched impact strength,23℃ 7 / 12 kJ/m² ISO 179/1eA
Charpy notched impact strength,-30℃ 4 / - kJ/m² ISO 179/1eA
Thermal properties dry / cond Unit Test Standard
Melting temperature,10℃/min 256 / * ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa 100 / * ISO 75-1/-2
Temp. of deflection under load,0.45 MPa 215 / * ISO 75-1/-2
Coeff. of linear therm. expansion,parallel 64 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion,normal 65 / * E-6/K ISO 11359-1/-2
Flammability dry / cond Unit Test Standard
Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 0.8 / * mm IEC 60695-11-10
Oxygen index 26 / * % ISO 4589-1/-2
Electrical properties dry / cond Unit Test Standard
Relative permittivity,100Hz 4.2 / - - IEC 60250
Relative permittivity,1MHz 3.9 / - - IEC 60250
Dissipation factor,100Hz 100 / - E-4 IEC 60250
Dissipation factor,1MHz 100 / - E-4 IEC 60250
Volume resistivity 1E11 / - Ohm*m IEC 60093
Electric strength 24 / - kV/mm IEC 60243-1
Other properties dry / cond Unit Test Standard
Water absorption,2mm 6 / * % Sim. to ISO 62
Humidity absorption,2mm 1.6 / * % Sim. to ISO 62
Density 1470 / - kg/m³ ISO 1183

联系湘樟塑料

相关材料