进口塑胶料
注:请在右边的搜索栏查找产品

LNP STAT-KON PA66 RFD02

添加时间:2013-02-22  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
LNP™ STAT-KON™ Compound RFD02
 
Also known as:LNP™ Stat-kon™ Compound RF Product reorder name:RFD02
LNP* Stat-kon* RFD02 is a compound based on Nylon 66 resin containing Glass Fiber, Carbon Powder. Added features of this material include: Electrically Conductive.
 
Property
TYPICAL PROPERTIES(1)
MECHANICAL Value Unit Standard
Tensile Stress,break 790 kgf/cm² ASTM D 638
Tensile Strain,break 5.5 % ASTM D 638
Tensile Modulus,50mm/min 84300 kgf/cm² ASTM D 638
Flexural Stress 1330 kgf/cm² ASTM D 790
Flexural Modulus 56200 kgf/cm² ASTM D 790
Tensile Stress,break 74 MPa ISO 527
Tensile Strain,break 5.1 % ISO 527
Tensile Modulus,1mm/min 7400 MPa ISO 527
Flexural Stress 139 MPa ISO 178
Flexural Modulus 6300 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 21 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 3 cm-kgf/cm ASTM D 256
Izod Impact,unnotched 80*10*4 +23℃ 14 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 3 kJ/m² ISO 180/1A
THERMAL Value Unit Standard
HDT,0.45 MPa,3.2mm,unannealed 252 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 236 ASTM D 648
CTE,-40℃ to 40℃,flow 6.84E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 4.68E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,flow 6.90E-05 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 4.80E-05 1/℃ ISO 11359-2
HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm 256 ISO 75/Bf
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 239 ISO 75/Af
PHYSICAL Value Unit Standard
Density 1.3 g/cm³ ASTM D 792
Moisture Absorption,50% RH,24 hrs 0.5 % ASTM D 570
Mold Shrinkage,flow,24 hrs(5) 1-1.2 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 1.4-1.6 % ASTM D 955
Mold Shrinkage,flow,24 hrs(5) 1.1 % ISO 294
Mold Shrinkage,xflow,24 hrs(5) 1.5 % ISO 294
Density 1.3 g/cm³ ISO 1183
ELECTRICAL Value Unit Standard
Surface Resistivity 1.E+02-1.E+05 Ohm ASTM D 257
Source GMD,last updated:2008/09/24
Parameter Injection Molding Value Unit
Drying Temperature 80
Drying Time 4 hrs
Maximum Moisture Content 0.15-0.25 %
Melt Temperature 280-305
Front-Zone 3 Temperature 295-305
Middle-Zone 2 Temperature 280-295
Rear-Zone 1 Temperature 265-275
Mold Temperature 95-110
Back Pressure 0.2-0.3 MPa
Screw Speed 30-60 rpm
Source GMD,last updated:2008/09/24
相关材料
上一页:LNP STAT-KON PA66 RFD03           下一页:LNP STAT-KON PA66 REP349