进口塑胶料
注:请在右边的搜索栏查找产品

LNP STAT-KON PA66 REL42

添加时间:2013-02-21  信息来源:http://www.simibc.com/  作者:苏州希普能塑料

LNP™ STAT-KON™ Compound PA66 REL42

 

Also known as:LNP™ Stat-kon™ Compound RCL-4042 Product reorder name:REL42
LNP* Stat-kon* REL42 is a compound based on Nylon 66 resin containing PTFE, Carbon Fiber. Added features of this material include: Electrically Conductive, Internally Lubricated.

 

Property
TYPICAL PROPERTIES(1)

MECHANICAL Value Unit Standard
Tensile Stress,yield 1340 kgf/cm² ASTM D 638
Tensile Stress,break 1340 kgf/cm² ASTM D 638
Tensile Strain,yield 2.5 % ASTM D 638
Tensile Strain,break 2.5 % ASTM D 638
Tensile Modulus,50mm/min 84300 kgf/cm² ASTM D 638
Flexural Stress 1890 kgf/cm² ASTM D 790
Flexural Modulus 147600 kgf/cm² ASTM D 790
Tensile Stress,yield 133 MPa ISO 527
Tensile Stress,break 133 MPa ISO 527
Tensile Strain,yield 2.2 % ISO 527
Tensile Strain,break 2.2 % ISO 527
Tensile Modulus,1mm/min 8690 MPa ISO 527
Flexural Stress 186 MPa ISO 178
Flexural Modulus 7400 MPa ISO 178
IMPACT Value Unit Standard
Izod Impact,unnotched,23℃ 45 cm-kgf/cm ASTM D 4812
Izod Impact,notched,23℃ 4 cm-kgf/cm ASTM D 256
Instrumented Impact Energy @ peak,23℃ 84 cm-kgf ASTM D 3763
Multiaxial Impact 17 cm-kgf ISO 6603
Izod Impact,unnotched 80*10*4 +23℃ 29 kJ/m² ISO 180/1U
Izod Impact,notched 80*10*4 +23℃ 4 kJ/m² ISO 180/1A
THERMAL Value Unit Standard
HDT,0.45 MPa,3.2mm,unannealed 260 ASTM D 648
HDT,1.82 MPa,3.2mm,unannealed 247 ASTM D 648
CTE,-40℃ to 40℃,flow 7.92E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,xflow 3.60E-05 1/℃ ASTM E 831
CTE,-40℃ to 40℃,flow 7.90E-05 1/℃ ISO 11359-2
CTE,-40℃ to 40℃,xflow 3.60E-05 1/℃ ISO 11359-2
HDT/Bf,0.45 MPa Flatw 80*10*4 sp=64mm 258 ISO 75/Bf
HDT/Af,1.8 MPa Flatw 80*10*4 sp=64mm 242 ISO 75/Af
PHYSICAL Value Unit Standard
Density 1.32 g/cm³ ASTM D 792
Moisture Absorption,50% RH,24 hrs 0.6 % ASTM D 570
Mold Shrinkage,flow,24 hrs(5) 0.3-0.5 % ASTM D 955
Mold Shrinkage,xflow,24 hrs(5) 1.1-1.3 % ASTM D 955
Mold Shrinkage,flow,24 hrs(5) 0.36 % ISO 294
Mold Shrinkage,xflow,24 hrs(5) 1.2 % ISO 294
Density 1.32 g/cm³ ISO 1183
ELECTRICAL Value Unit Standard
Surface Resistivity 1.E+02-1.E+06 Ohm ASTM D 257
Source GMD,last updated:2008/09/24
Parameter Injection Molding Value Unit
Drying Temperature 80
Drying Time 4 hrs
Maximum Moisture Content 0.15-0.25 %
Melt Temperature 280-305
Front-Zone 3 Temperature 295-305
Middle-Zone 2 Temperature 280-295
Rear-Zone 1 Temperature 265-275
Mold Temperature 95-110
Back Pressure 0.2-0.3 MPa
Screw Speed 30-60 rpm
Source GMD,last updated:2008/09/24

相关材料
上一页:LNP STAT-KON PA66 REP349           下一页:LNP STAT-KON PA66 REF42I