进口塑胶料
注:请在右边的搜索栏查找产品

PA6 PLS93G35DH1 BK549 含35%玻纤,耐焊接尼龙

添加时间:2013-11-04  信息来源:http://www.simibc.com/  作者:苏州希普能塑料

Zytel PLS93G35DH1 BK549

Zytel® PLS93G35DH1 BK549 | PA6-GF35 ZYTEL® PLUS NYLON RESIN
 
Regional Availability
North America, Europe, Asia Pacific, South and Central America, Near East/Africa, Global
 
Processing
Injection Moulding
 
Delivery form
Pellets
 
Additives
Release agent
 
Special characteristics
Heat stabilised or stable to heat
 
Product Text
Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.
 
The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
 
Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
 
Zytel® PLS93G35DH1 is a 35% glass fibre reinforced, DuPont™ SHIELD protected polyamide 6 for injection moulding. It provides exceptional welding resistance and excellent heat resistance.
 
PROPERTIES
Rheological properties dry / cond Unit Test Standard
Rheo Moulding shrinkage,parallel 0.2 / * % ISO 294-4,2577
Moulding shrinkage,normal 0.7 / * % ISO 294-4,2577
Mechanical properties dry / cond Unit Test Standard
Mech Tensile Modulus 12000 / 6500 Mpa ISO 527-1/-2
Stress at break 200 / 120 Mpa ISO 527-1/-2
Strain at break 3.5 / 7 % ISO 527-1/-2
Charpy impact strength     ISO 179/1eU
23℃ 100 / 90 kj/㎡
-30℃ 80 / 80 kj/㎡
Charpy notched impact strength     ISO 179/1eA
23℃ 15 / - kj/㎡
-30℃ 13 / - kj/㎡
Thermal properties dry / cond Unit Test Standard
Therm Melting temperature,10℃/min 224 / * ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa 212 / * ISO 75-1/-2
Temp. of deflection under load,0.45 MPa 220 / * ISO 75-1/-2
Coeff. of linear therm. expansion,parallel 7 / * E-6/K ISO 11359-1/-2
Coeff. of linear therm. expansion,normal 100 / * E-6/K ISO 11359-1/-2
Flammability dry / cond Unit Test Standard
Flam Burning Behav. at 1.5 mm nom. thickn. HB / * class IEC 60695-11-10
Thickness tested 1.5 / * mm IEC 60695-11-10
Electrical properties dry / cond Unit Test Standard
Elec Volume resistivity >1E13 / 7E11 Ohm*m IEC 60093
Surface resistivity * / 6E13 Ohm IEC 60093
Comparative tracking index 550 / - - IEC 60112
Other properties dry / cond Unit Test Standard
Other Water absorption,2mm 2 / * % Sim. to ISO 62
Density 1400 / - kg/m³ ISO 1183
Rheological calc. properties Value Unit Test Standard
RheoCalc Density of melt 1240 kg/m³ -
Thermal conductivity of melt 0.28 W/(m K) -
Spec. heat capacity melt 2100 J/(kg K) -
Ejection temperature 163 -
Min. mould temperature 70 -
Max. mould temperature 120 -
Min. melt temperature 260 -
Max. melt temperature 280 -
 
Chem
Chemical Media Resistance
 
Mineral oils
√ SAE 10W40 multigrade motor oil (130℃)
 
Other
× Water (90℃)
 
Symbols used:
√ possibly resistant
Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).
 
× not recommended - see explanation
Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).
联系我们
相关材料