进口塑胶料
注:请在右边的搜索栏查找产品

PA6 73G30HSL BK261 含30%玻纤增强,热稳定

添加时间:2013-11-03  信息来源:http://www.simibc.com/  作者:苏州希普能塑料

Zytel 73G30HSL BK261

Zytel® PA6 73G30HSL BK261 | PA6-GF30 NYLON RESIN
 
Characteristics
Regional Availability
Europe, Near East/Africa
 
Processing
Injection Moulding
 
Product Text
Common features of Zytel® nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good high temperature performance, good electrical and flammability properties, good abrasion and chemical resistance. In addition, Zytel® nylon resins are available in different modified and reinforced grades to create a wide range of products with tailored properties for specific processes and end-uses. Zytel® nylon resin, including most flame retardant grades, offer the ability to be coloured.
 
The good melt stability of Zytel® nylon resin normally enables the recycling of properly handled production waste. If recycling is not possible, DuPont recommends, as the preferred option, incineration with energy recovery (-31kJ/g of base polymer) in appropriately equipped installations. For disposal, local regulations have to be observed.
 
Zytel® nylon resin typically is used in demanding applications in the automotive, furniture, domestic appliances, sporting goods and construction industry.
 
Zytel® 73G30HSL BK261 is a 30% glass fibre reinforced, heat stabilised polyamide 6 for injection moulding. 
 
PROPERTIES
Mechanical properties dry / cond Unit Test Standard
Mech Tensile Modulus 9500 / 5700 MPa ISO 527-1/-2
Stress at break 180 / 110 MPa ISO 527-1/-2
Strain at break 3 / 6 % ISO 527-1/-2
Charpy impact strength,23℃ 85 / 90 kJ/m² ISO 179/1eU
Charpy notched impact strength,23℃ 14 / 20 kJ/m² ISO 179/1eA
Thermal properties dry / cond Unit Test Standard
Therm Melting temperature,10℃/min 221 / * ISO 11357-1/-3
Temp. of deflection under load,1.8 MPa 205 / * ISO 75-1/-2
Temp. of deflection under load,0.45 MPa 220 / * ISO 75-1/-2
Flammability dry / cond Unit Test Standard
Flam Burning Behav. at thickness h HB / * class IEC 60695-11-10
Thickness tested 0.8 / * mm IEC 60695-11-10
Other properties dry / cond Unit Test Standard
Other Density 1360 / - kg/m³ ISO 1183
VDA Properties Value Unit Test Standard
VDA Burning rate,Thickness 1 mm 30 mm/min ISO 3795 (FMVSS 302)

 

Chem

Chemical Media Resistance

 

Acids

√ Acetic Acid (5% by mass) (23℃)

√ Citric Acid solution (10% by mass) (23℃)

√ Lactic Acid (10% by mass) (23℃)

× Hydrochloric Acid (36% by mass) (23℃)

× Nitric Acid (40% by mass) (23℃)

× Sulfuric Acid (38% by mass) (23℃)

× Sulfuric Acid (5% by mass) (23℃)

× Chromic Acid solution (40% by mass) (23℃)

 

Bases

× Sodium Hydroxide solution (35% by mass) (23℃)

√ Sodium Hydroxide solution (1% by mass) (23℃)

√ Ammonium Hydroxide solution (10% by mass) (23℃)

 

Alcohols

√ Isopropyl alcohol (23℃)

√ Methanol (23℃)

√ Ethanol (23℃)

 

Hydrocarbons

√ n-Hexane (23℃)

√ Toluene (23℃)

√ iso-Octane (23℃)

 

Ketones

√ Acetone (23℃)

 

Ethers

√ Diethyl ether (23℃)

 

Mineral oils

√ SAE 10W40 multigrade motor oil (23℃)

√ SAE 10W40 multigrade motor oil (130℃)

√ SAE 80/90 hypoid-gear oil (130℃)

√ Insulating Oil (23℃)

 

Standard Fuels

√ ISO 1817 Liquid 1 (60℃)

√ ISO 1817 Liquid 2 (60℃)

× ISO 1817 Liquid 3 (60℃)

× ISO 1817 Liquid 4 (60℃)

√ Standard fuel without alcohol (pref. ISO 1817 Liquid C) (23℃)

√ Standard fuel with alcohol (pref. ISO 1817 Liquid 4) (23℃)

√ Diesel fuel (pref. ISO 1817 Liquid F) (23℃)

× Diesel fuel (pref. ISO 1817 Liquid F) (90℃)

× Diesel fuel (pref. ISO 1817 Liquid F) (>90℃)

 

Salt solutions

√ Sodium Chloride solution (10% by mass) (23℃)

× Sodium Hypochlorite solution (10% by mass) (23℃)

√ Sodium Carbonate solution (20% by mass) (23℃)

√ Sodium Carbonate solution (2% by mass) (23℃)

× Zinc Chloride solution (50% by mass) (23℃)

 

Other

√ Ethyl Acetate (23℃)

× Hydrogen peroxide (23℃)

√ DOT No. 4 Brake fluid (130℃)

√ DOT No. 4 Brake fluid (120°C)

× Ethylene Glycol (50% by mass) in water (108℃)

× Coolant Glysantin G48, 1:1 in water (130°C)

√ 1% nonylphenoxy-polyethyleneoxy ethanol in water (23℃)

√ 50% Oleic acid + 50% Olive Oil (23℃)

√ Water (23℃)

× Water (90℃)

× Phenol solution (5% by mass) (23℃)

 

Symbols used:

√ possibly resistant

Defined as: Supplier has sufficient indication that contact with chemical can be potentially accepted under the intended use conditions and expected service life. Criteria for assessment have to be indicated (e.g. surface aspect, volume change, property change).

 

× not recommended - see explanation

Defined as: Not recommended for general use. However, short-term exposure under certain restricted conditions could be acceptable (e.g. fast cleaning with thorough rinsing, spills, wiping, vapor exposure).

希普能工程塑料
相关材料