进口塑胶料
注:请在右边的搜索栏查找产品

PA6 B3WGM24 HPX BK23210 含30%玻璃/矿物

添加时间:2013-09-08  信息来源:http://www.simibc.com/  作者:苏州希普能塑料
Ultramid PA6 B3WGM24 HPX BK23210
Ultramid® PA6 B3WGM24 HPX BK23210
聚酰胺6
玻璃/矿物,30%
BASF Corporation
 
产品说明
Ultramid B3WGM24 HPX BK23210 is a very high productivity, 30% glass/mineral reinforced heat stabilized injection molding PA6 grade for components that require medium rigidity, excellent dimensional stability, low warpage out of the tool and excellent appearance.
 
Typical applications include automobile engine covers, housings and automotive door handles.
 
填料增强:含30%玻璃/矿物
含添加剂:热稳定剂
材料特点:尺寸稳定,低翘曲,热稳定,生产阶段快,外观良好,中等硬度
产品用途:把手,工业领域,汽车的发动机罩下的零件,汽车领域的应用,外壳
产品形式:颗粒料
外观颜色:黑色
加工方法:注射成型
塑料牌号:PA6 B3WGM24 HPX BK23210
定属记号:尼龙6
代理销售:苏州希普能工程塑料 185 5121 3137 谭经理
 
物料数据
物理性能 额定值 单位制 测试方法
密度 1.36 g/cm³ ISO 1183
机械性能 额定值 单位制 测试方法
拉伸模量(23℃) 7900 MPa ISO 527-2
拉伸应力(断裂,23℃) 110 MPa ISO 527-2
拉伸应变(断裂,23℃) 3.0 % ISO 527-2
弯曲模量(23℃) 7960 MPa ISO 178
冲击性能 额定值 单位制 测试方法
简支梁缺口冲击强度(23℃) 4.4 kJ/m² ISO 179
悬壁梁缺口冲击强度     ISO 180
-40℃ 4.4 kJ/m²
23℃ 5.2 kJ/m²
热性能 额定值 单位制 测试方法
热变形温度      
0.45 MPa,未退火 210 ISO 75-2/B
1.8 MPa,未退火 190 ISO 75-2/A
溶融温度(DSC) 220 ISO 3146
注射 额定值 单位制
干燥温度 83.0
干燥时间 2.0 到 4.0 hr
建议的最大水分含量 0.15 %
加工(熔体)温度 270 到 295
模具温度 80.0 到 95.0
注塑压力 3.50 到 12.5 MPa
注射速度 快速  
注射说明
Product is supplied in sealed containers and drying prior to molding is not required. If drying becomes necessary,a dehumidifying or desiccant dryer operating at 80℃ (176℉) is recommended. Drying time is dependent on moisture level,but 2-4 hours is generally sufficient.
Ultramid® polyamides are molding compounds based on PA 6, PA 66 and copolyamides such as PA 66/6. Due to their outstanding properties these materials have become indispensable in almost all fields of engineering for the most varied components and machine parts, as high-quality electrical insulating materials and for many special applications.
联系湘樟塑料
相关材料
上一页:PA6 B3Z BK30464 抗冲击           下一页:PA6 B3WGM24 HP BK23210 含30%玻璃/矿物